Wednesday, September 7, 2016
| Time | Event | |
| 09:30 - 13:00 | Visit of the Cité de l'Espace - We propose the visit of the "Cité de l'espace" before the opening of the conference. | |
| 13:00 - 14:00 | Opening cocktail | |
| 14:00 - 14:30 | Registration at the welcome desk (Room ALTAIR) (room ALTAIR) | |
| 14:30 - 15:00 | Welcome speeches (room ALTAIR) - Opening of the conference | |
| 15:00 - 16:00 | SPF Materials I (room ALTAIR) - Gérard BERNHART | |
| 15:00 - 15:30 | › Comparison of Superplastic Forming Abilities of As-cast AZ91 Mg Alloy Prepared by Twin Roll Casting and WE43 Alloy - Vit Janik, WMG - University of Warwick | |
| 15:30 - 16:00 | › Two-dimensional grain boundary sliding and strain rate effect on dislocation characteristics in ODS ferritic steel - Hiroshi Masuda, Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, The University of Tokyo [Toyo] | |
| 16:00 - 16:30 | Coffee break | |
| 16:30 - 18:00 | Tool / Surface Coating (room ALTAIR) - Anton KOTOV | |
| 16:30 - 17:00 | › A comparative study assessing the wear behaviour of different ceramic die materials during superplastic forming - Ares A. Gomez-Gallegos, Advance Forming Research Centre, University of Strathclyde | |
| 17:00 - 17:30 | › A method for the systematic assessment of lubricant performance during superplastic sheet forming - Marta Drabek, Advanced Forming Research Centre, University of Strathclyde | |
| 17:30 - 18:00 | › Protective coatings for superplastic forming ceramic dies: An initial study on protective coatings performance - Andrea Staiano, University of Strathclyde | |
| 18:00 - 23:55 | Free Evening |
Thursday, September 8, 2016
| Time | Event | |
| 08:20 - 09:00 | Registration & Welcome coffee (room ALTAIR) | |
| 09:00 - 10:30 | Material modelling / Process modelling (room ALTAIR) - Rajab SAID | |
| 09:00 - 09:30 | › Using the Particle Swarm Optimization Method for the Constitutive Modelling of AZ31B - Firas Jarrar, The Petroleum Institute | |
| 09:30 - 10:00 | › Mechanical behavior of Ti-6Al-4V titanium alloy with microstructural evolution modeling under hot and superplastic forming conditions - Marcio Santos, Institut Clément Ader, Polytechnic School of the University of São Paulo (Brazil) | |
| 10:00 - 10:30 | › FE-based optimization of the preform geometry for the superplastic forming of a spherical tank - Donato Sorgente, Università degli Studi della Basilicata [Potenza] | |
| 10:30 - 11:00 | Coffee break | |
| 11:00 - 12:30 | SPF Materials II (room ALTAIR) - Marta DRABEK | |
| 11:00 - 11:30 | › Aluminium alloys grain refinement and superplasticity - Anton Kotov, National University of Science and Technology "MISIS" | |
| 11:30 - 12:00 | › In-Situ EBSD Analysis & Characterisation of Nickel Additions to a Medium Strength 7000 Series Alloy - Scott Taylor, WMG - University of Warwick | |
| 12:00 - 12:30 | › On the Formability of AA6061/SiCp Composite Synthesized Using Friction Stir Processing - Viswanathan D, Professor (Retd.), Department of Mechanical Engineering, Anna University - Padmanabhan K.A, Professor of Eminence, Department of Mechanical Engineering, Anna University | |
| 12:30 - 14:00 | Lunch | |
| 14:00 - 15:30 | Process modelling / Simulation (room ALTAIR) - Donato SORGENTE | |
| 14:00 - 14:30 | › Numerical and experimental integration in analysis of a superplastic forming - Carunchio Andre, IPT Instituto de Pesquisas Tecnológicas (Brazil) | |
| 14:30 - 15:00 | › Development of a strain dependent pressure law for superplastic forming of 2024 aluminium alloy - Rou DU, Laboratoire Angevin de Mécanique, Procédés et innovAtion | |
| 15:00 - 15:30 | › Superplastic forming optimization technique based on average strain rate controlling – Numerical simulation and experimental validation - Maxime ROLLIN, AIRBUS Operations Ltd., Ecole nationale supérieure des Mines d'Albi‐Carmaux | |
| 15:30 - 16:00 | Coffee break (room ALTAIR) | |
| 16:00 - 17:30 | SPF Processes (room ALTAIR) - Vit JANIK | |
| 16:00 - 16:30 | › Low-temperature superplastic forming and diffusion bonding technology - Rinat Safiullin, Institute for Metals Superplasticity Problems Russian Academy of Sciences | |
| 16:30 - 17:00 | › Press development for superplastic forming with in situ and real time pressure and temperature control system and module with digital image correlation for strain monitoring. - Gilmar Bathala, Universidade de São Paulo | |
| 17:00 - 17:30 | › An industrialization case of superplastic forming by using Infra-Red heater - Marion Le Fournier, Aurock | |
| 18:00 - 18:30 | Bus to Toulouse city center: meeting point at the entrance of the "cité de l'Espace". | |
| 18:30 - 20:00 | Free downtown tour (around the restaurant place) | |
| 20:00 - 23:30 | Banquet - Dinner Cruise on board Occitania |
|
| 23:30 - 23:55 | Bus to the "Cité de l'Espace" |
Friday, September 9, 2016
| Time | Event | |
| 08:50 - 09:30 | Registration & Welcome coffee (room ALTAIR) | |
| 09:30 - 10:30 | Industrial Applications: advanced forming processes I (room ALTAIR) - Richard DASHWOOD | |
| 09:30 - 10:00 | › From SPF to Hotforming of Aluminium Sheets – Simulation & Modelling Challenges between Industry and Academia - Rajab Said, ESI Group | |
| 10:00 - 10:30 | › Comparison of technical and commercial aspects regarding cold forming, SPF and hot stamping - W. Beck, FormTech GmbH | |
| 10:30 - 11:00 | Coffee break (room ALTAIR) | |
| 11:00 - 12:00 | Industrial Applications: advanced forming processes II (room ALTAIR) - Werner BECK | |
| 11:00 - 11:30 | › Hot Forming 2.0: Hydraulic Press for Hot Deep Drawing of Titanium - Hilko Siebels, Schuler Pressen GmbH | |
| 11:30 - 12:00 | › Hot & Cold Forming of industrial parts: A comparative study between aeronautical & automotive industries. How to improve collaboration with a die maker ? - Michel Garson, Loire Etude | |
| 12:00 - 13:00 | Concluding Remarks (room ALTAIR) | |
| 13:00 - 14:00 | Lunch | |
| 14:15 - 18:00 | Industrial visit - Aeroscopia Museum & AIRBUS Tour. At the end of the visit, please note that the bus will stop at the airport then at the railway station before coming back to the "Cité de l'espace" . |
